Our Tray Dryers are suitable for Chemicals, Dyestuff, Pharmaceutical and food products. Stainless steel grade tray dryers are used for the best drying results in the conventional process. Tray dryer with Hot air and Steam base are supplied with double-walled cabinet, single or two doors as per customer demand. In hot-air dryers, two walls are filled with high-density fiber-glass wool insulation material to avoid heat transfer. Tray dryer doors are provided with gaskets. Stainless steel trays are placed on the movable trolleys. Tray Dryer models are available with different ranges starting from Lab Model of 6, 12, and Production Models of 24, 48, 96, 192 trays.

Our models are most suitable for Pharmaceutical Tray Dryer, Tray Dryer for foods, Chemical Tray Dryer, Hot Air Tray Dryers, Steam Air Tray Dryer, Tray Dryer with Trolley, Tray Dryer for Ayurveda products, cosmetic products Tray Dryers, Hot Air Tray Dryers. Tray Dryer Manufacturer is used to remove liquids or moisture from bulk solids, granules, powders, parts, and continuous sheets or other liquids or powder, granules etc.

Tray Dryers are of two types: Direct and Indirect. Hot Air Direct dryers convectively heat a product through direct contact with heated air, gas or a combusted gas steam product. Tray dryer in-direct dryers conductively heat a product through contact with a heated wall. Our Tray Dryers are normally supplied with steam/electric /thermic fluid /hot water heating system. Suitable heating coils are provided in the dryers. Doors are provided at the front and/or rear side of the dryer. Door panels are lined with a silicone rubber gasket to prevent any leakages. Suitable locking is provided for the doors.

Special Features:

Our Tray Dryer is designed for uniform circulation of hot air in the drying chamber. Electrical mode

  • Inside surface is painted with heat resistant aluminum paint and outside with synthetic enamel.
  • cGMP models with SS 316 Construction, Single page design, coving coroners, fully washable type models available.
  • Inside of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons, timers, controllers etc.

Construction
External Tray Dryer: 1.2mm Thick internal: 1.2mm Thick moc: cGMP

Surface Finish
External Tray Dryer: Buffed to 150 grit matt finish Internal Tray Dryer: Buffed to 220 grit mirror finish.

Door:
Doors at provided at the front and / or rear side of the dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors of Tray dryer.

Air Circulation:
Air circulation is done by specially designed recirculation blowers inside the Tray dryer. The blower capacity, static & design depends on the size and model of dryer.

Heating:
Dryers are normally supplied with either steam/ electric/ thermal fluid / hot water heating system. Suitable heating coils / clarifiers are provided in the tray dryers.

Temperature Control
Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.

Trays:
Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with coved corners. Trays are buffed to mirror finish..

Trolley:
Trolley is provided in the tray dryers to accommodate trays in it. Trolley trucks are used to load and unload the trays into the dryer.

Control Panel:
Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.

Specifications:

Models GPT-TD-12 GPT-TD-24 GPT-TD-48 GPT-TD-96
Loading capacity 12 Trays 24 Trays 48 Trays 96 Trays
No of Doors One One One Two
No of Blowers One One One Two
No of motors/H.P.3 Phase 415 Volts. 1 H.P.3 phase 415 volts 1 H.P.3 phase 415 volts 2 H.P.3 phase 415 volts 2 H.P.3 phase 415 volts-2nos
Electrical Heating Load for100°C 3kw/6kw 6kw/9kw 9kw/12kw 12kw/16kw
Insulation in mm 100°C 50mm 50mm 50mm 50mm
Tray Size 812x406x31mm 812x406x31mm 812x406x31mm 812x406x31mm